New
Free Shipping on All Orders Over 40!
Free Shipping on All Orders Over 40!
Fits Most Levels StealthMounts Level Mounts are built to fit many levels on the market up to 62 mm high and 32 mm deep, so you can store the levels you already own without chasing a brand-specific rack. Durable ABS Build Made from injection moulded ABS plastic, these mounts are built for everyday shop, van, and site use where cheap brackets tend to crack or loosen up. Quick One-Hand Access The clip-in design holds the level securely but still lets you grab it with one hand, which matters when you are moving between layout, checking plumb, and hanging it back up fast.
StealthMounts Level Mounts are wall-mount level holders designed to store and protect spirit levels in shops, vans, garages, and jobsite setups. This is a level storage mount designed for keeping levels organized, protected, and easy to grab when you need them. Model OM-LM-BLK-2 gives you a 2-pack in black, built for users who are tired of levels sliding around in drawers, getting buried under other gear, or getting knocked out of calibration from careless storage.
The big selling point here is fit. These mounts are compatible with levels up to 62 mm in height and 32 mm in depth, which covers a large chunk of the levels most contractors and serious DIY users already have on hand. StealthMounts also calls out compatibility with brands like Stabila, Empire, SOLA, Milwaukee, Stanley, Stanley FatMax, DeWalt, and Irwin. In practical terms, that means you are not buying into a one-brand storage system just to hang a couple of levels properly.
Each mount clips the level in securely while still allowing easy one-handed removal. That matters more than it sounds. A level you actually use every day needs to come off the wall cleanly, go back up quickly, and stay put when the van door slams or the shop gets busy. These are designed to prevent excessive movement once installed, so your levels stay where you put them instead of rattling loose or banging into adjacent tools.
Build quality is straightforward and job-focused. The StealthMounts Level Mounts are made in Great Britain from strong injection moulded ABS plastic, which is a smart material choice for this kind of organizer. ABS holds up well to repeated use, gives a little where needed, and is far less likely to chip or snap than brittle plastic hangers. The countersunk screw holes also help the mounts sit down firmly against the mounting surface for a cleaner and more secure install.
These mounts are meant to work wherever you keep your measuring and layout tools close by. You can mount them to a wall, a cabinet side, a workbench end panel, or the inside of a service van. They can hold levels vertically or horizontally, which gives you more freedom to work around the space you actually have rather than the space a storage system wishes you had. That flexibility is useful in tighter mobile setups where every inch matters.
For jobsite practicality, this is one of those simple storage upgrades that pays off every day. Good levels are not cheap, and tossing them into a pile with clamps, bars, and hand tools is a good way to scratch them up or worse. A dedicated level hanger keeps them visible, separate, and easy to reach, which saves time and helps protect tools you rely on for accurate layout and install work.
Who should buy these? Carpenters, remodelers, general contractors, cabinet installers, finish crews, and anyone outfitting a garage or work van will get the most out of them. If you own multiple levels and want clean, secure storage without building a custom rack, the StealthMounts Level Mounts are a practical answer. They are especially useful for users who care about keeping layout tools organized and not beat up between jobs.
If your levels ride loose in the van or truck, they get banged around, buried, and harder to trust over time. A dedicated mounting point keeps them protected and makes it obvious where they belong at the end of the job.
These mounts are screw-mounted, so you can put them on plywood walls, cabinets, shelving ends, or van interiors without overthinking the install. Once mounted, they hold the level securely without allowing excessive movement.
This is not a flimsy accessory-bin organizer. The injection moulded ABS construction is meant to handle repeated clip-in and pull-out use, which is exactly what happens when a level is part of your daily kit.
| Material | ABS plastic |
|---|---|
| Color | Black |
| Mounting Type | Wall mount, screw-on |
| Capacity | Holds 2 levels |
| Maximum Compatible Level Height | 62 mm |
| Maximum Compatible Level Depth | 32 mm |
| Weight | 0.28 lbs |
| Made In | United Kingdom |
Level Size Range Compatible with levels up to 62 mm high and 32 mm deep. Brand Fit Works with many leading level brands including Stabila, Empire, SOLA, Milwaukee, Stanley, Stanley FatMax, DeWalt, and Irwin. Mounting Surface Can be mounted to any suitable surface with screws for shop, garage, cabinet, or vehicle storage.
Carpentry Construction General Contracting Remodeling Workshop Storage Van Organization Garage Organization DIY / Hobbyist
Before you screw the mounts down, test-fit your thickest level and set the spacing with that one. It takes an extra minute, but it makes daily grab-and-go use smoother and keeps you from mounting them too tight.
Lifetime warranty against manufacturer’s defects.
Tool Nut’s Take
The StealthMounts Level Mounts are a simple buy, but a smart one if you care about protecting layout tools and not wasting time hunting for them.
Add Related products to weekly line up
There are no reviews yet.