Des-Case DT01EB1LK002 Drum Topper

Compact, portable and customized for your application, the drum topper is an option you can carry wherever you need to go. Our drum topper provides many uses, including:

• Filtering new oil directly from the drum
• Allowing you to fill small totes
• Acting as an offline filter for critical equipment

Handheld Drum Toppers

Compact, portable and customized for your application, the drum topper is an option you can carry wherever you need to go. Our drum topper provides many uses, including: Filtering new oil directly from the drum Allowing you to fill small totes Acting as an offline filter for critical equipment You can completely customize your drum topper below. Simply click on the desired options to create your specific drum topper unit.

Specifications

For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO 10-460 (2000ssu/431cSt) at 100F/38C within ambient temperature ranges of -8F to 104F (-22C to 40C)

Materials:

• Frame: Aluminum
• Paint: Industrial powder coat
• Filter Heads: Aluminum
• Fittings: Zinc-plated steel and/or brass
• Pumps: Aluminum/steel
• Hoses: Clear PVC with steel wire
• Gaskets: Buna-N

Filter Indicators:

• Filter indicator pops at 22psid (1.55bar) as warning that filter elements need to be replaced

Pump Relief:

• Opens at 65psi (5.49bar)

Weight:

• Approximately 45-55lbs/20.4-24.9Kg (will vary depending on options selected)

Dimensions:

• 24.5L x 13.5W x 15.4H

Applications

• Decontaminating systems
• Flushing new or repaired systems
• Dispensing new oil
• Pre-filtering new oil
• Evacuating used oil
• Topping off reservoirs
• Collecting oil samples for analysis

Intended Use

• To be used for offline, secondary filtration and not inline filtration
• In general industrial environments, both indoors and outdoors (IP rating of 54)
• For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO 460 at 100F/38C within ambient temperature ranges of -8F to 104F (-22C to 40C)
• Placed at the same level or below the equipment being filtered and within reach of the recommended standard 6 foot hoses
• This system should be stored and used on a level surface, right side up, in a low-traffic area, and connected to the appropriate power source

What is Standard

• Automatic pressure relief valve
• Non-bypass filter heads
• Dual-stage filtration
• 6 hose assemblies with various quick connect options
• 25 power cord (for electric motors only)
• Industrial powder-coated paint
• One-year warranty

TDS